Product Overview
GD-600 is a full-automatic flowmeter based on micro-concentration technology. It uses K-band planar radar technology to measure the velocity and level of water bodies in a non-contact manner. Based on built-in software models and algorithms. Calculate and output the instan- taneous flow and cumulative flow in real-time sections: non-touch flow measurement can be performed in the same places as rivers, irrigation canals, under- ground drainage networks, flood prevention and other occasions; this product has the characteristics of low power consumption, high reliability and convenient maintenance ; The measurement process is not affected by factors such as temperature, sediment, river pollutants, and floating objects on the water surface.
Product Parameter
| Project |
Index |
| Flow measurement system |
| Measurement principle |
Planar Microstrip Array Antenna CW + FMCW |
| Operating mode |
Manual, automatic, telemetry |
| Applicable environment |
24 hours, rainy |
| Operating temperature |
-30°C~80°C |
| Operating Voltage |
7 ~ 32VDC; 5.5 ~ 32VDC (optional) |
| Working current |
12VDC input, working mode: S150mA standby mode: S1mA |
| Radar flowmeter |
| Radar power |
100mW |
| Radar frequency |
24GHz |
| Maximum range |
40m |
| Speed measurement range |
0.03 ~ 20m / s |
| Speed measurement accuracy |
±0.01m/s ; ±1 %FS |
| Antenna angle |
12° |
| Measurement direction |
Automatic identification of water flow direction, built-in vertical angle correction |
| Radar water level gauge |
| Radar power |
100mW |
| Radar frequency |
24GHz |
| Measuring range |
40m |
| Measurement accuracy |
±3mm |
| Antenna angle |
11° |
Product Feature
1.Non-contact measurement, combined with cross-section parameters to calculate flow, without wind. Temperature fog, frost, sediment, floating objects, etc .; with rain protection mode.
2.Suitable for a variety of measurement requirements, can output velocity, water level, flow measurement data.
3.Scalable array-type multi-point flow measurement, through the configuration of a set of flow meters and multiple sets of flow meters, to measure the flow of a wide section.
4.Suitable for trapezoidal, circular, U-shaped and other sections; section parameter setting is simple and convenient.
5.Convenient configuration software, can configure a variety of parameters according to actual needs to adapt to different site conditions.
Product Detail
